Olympic 6-501V won't tune below 600 Kilocycles
Page 2 of 2 • Share •
Page 2 of 2 •
1, 2
Re: Olympic 6-501V won't tune below 600 Kilocycles
Thanks Bill, but if you'll notice in my post second above yours, entitled, "Success", the problem was the tuner plates shorting, and I have fixed it to where it only shorts around 800 kilocycles very briefly. It will track down to 525 Kc., and up to 1690.
I usually tune the two IF cans using a weaker local during the daytime, then will double check by using my generator at 455 Kc., but I am usually right on.
I usually tune the two IF cans using a weaker local during the daytime, then will double check by using my generator at 455 Kc., but I am usually right on.

fifties- Member

- Number of posts: 30
Age: 67
Location: So Cal
Registration date: 2010-04-03
Re: Olympic 6-501V won't tune below 600 Kilocycles
O.K. Sorry. Missed that post.
Glad my suggestion on tuner helped.
Bill Cahill
Glad my suggestion on tuner helped.
Bill Cahill
_________________
Please also join us here; http://videokarma.org/index.php
Page 2 of 2 •
1, 2
Similar topics» mig33 new 21 olympic commands
» Wangan Midnight Maximum Tune 3
» Olympic 6-501V won't tune below 600 Kilocycles
» off-tune Utau's (not a problem with the ust)
» Midnight Maximum Tune Wangan
» Wangan Midnight Maximum Tune 3
» Olympic 6-501V won't tune below 600 Kilocycles
» off-tune Utau's (not a problem with the ust)
» Midnight Maximum Tune Wangan
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum
